home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19950929-19951130
/
000201_news@columbia.edu_Thu Oct 26 01:17:52 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-12-25
|
2KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA10092
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Wed, 25 Oct 1995 21:18:04 -0400
Received: by apakabar.cc.columbia.edu id AA28200
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Wed, 25 Oct 1995 21:18:02 -0400
Path: news.columbia.edu!watsun.cc.columbia.edu!fdc
From: fdc@watsun.cc.columbia.edu (Frank da Cruz)
Newsgroups: comp.protocols.kermit.misc
Subject: Re: Local Echo Options (inquiry)
Date: 26 Oct 1995 01:17:52 GMT
Organization: Columbia University
Lines: 22
Message-Id: <46mnk0$rh6@apakabar.cc.columbia.edu>
References: <46louc$sfu@geraldo.cc.utexas.edu>
Nntp-Posting-Host: watsun.cc.columbia.edu
Apparently-To: kermit.misc@watsun.cc.columbia.edu
In article <46louc$sfu@geraldo.cc.utexas.edu>,
Kagan Tumer <kagan@pegasus.ece.utexas.edu> wrote:
: I recently purchased a used Intel Modem. It works fine except for a
: quirk: when I connect with kermit, the AT commands are invidible to me.
: If I use "set terminal echo local" on kermit, then I get double letters
: when I do connect.
:
: I dont' have the manual to check for this, but a single sheet accompanying
: the software says that the WINFAX software turns the echo off when it
: exits. However, Since I'm not using this software, I can't fix the problem
: this way.
:
: does anyone know how to enable the echo of the AT commands without doubling
: the echo after the connection is made. (I'm using kermit).
:
You don't even need the modem manual for this one. Just look in Table
I-2, "Selected Hayes Smartmodem 2400 Commands", page 270 of "Using MS-DOS
Kermit".
The command is ATE1.
- Frank